Product Category
Teflon septa for sample handling and safety
-
Thermo Scientific Nalgene. Teflon® FEP Bottles RCF to 4,000 x g Withstand temperatures from -100° to +150°C Flat bottoms Autoclavable bottles have an 80% capacity (approx. 200 mL) in refrigerated centrifuges. Bottles include 38 mm Tefzel® ETFE screw caps. Dimensions (o.d. x H, mm): 62 x 122.
-
The septum is provided with a thin 0.005” PTFE layer laminated to highly pure silicone, and slit through the center for easier needle penetration and to release the vacuum that forms when a large volume of sample is withdrawn from a vial.
-
DWK Life Sciences (Wheaton) Screw caps Autoclavable Rubber lined caps Amber sample vials have solid top black phenolic caps that are Teflon® faced with 14B rubber liners. Cap material is black phenolic and cap and liners are autoclavable. With these vials, Teflon® and Type 1 glass are the only surfaces that will make. Compare this item.
-
For applications involving automated transport of vials, magnetic caps are recommended. The cap liner or septa is the part of the cap which establishes a tight seal with the vial. Liners and septa can be laminated with PTFE on one or both sides, which results in high chemical resistance and a nearly inert barrier between sample and septa material.
-
The Finneran 24 mm septa is mainly used with screw thread closures for tight sealing of the stored sample. It is mainly used in research laboratories or in chemical industries. This septa is made of sturdy PTFE/silicone material which ensures long lasting usage and durability. Compare this item.
-
Supplied with open top polypropylene caps and Teflon®/FDA grade silicone septa Include a polypropylene cap and Teflon/silicone/polypropylene liner to ensure easier sampling and extraction 1755C01 through C12 are clear, 1755C18 through C44 are amber. Related Products: Bottle With Septum.
-
Teflon® FEP Bottles RCF to 4,000 x g Withstand temperatures from -100° to +150°C Flat bottoms Autoclavable bottles have an 80% capacity (approx. 200 mL) in refrigerated centrifuges. Bottles include 38 mm Tefzel® ETFE screw caps. Dimensions (o.d. x H, mm): 62 x 122. Related Products: Bottles Autoclavable Nalgene.
-
.jpg)
Septa Selection for Autosampler Vials Use this simple selector tool to choose the right SureSTART septum, cap, and vial to prevent autosampler injection failure. Go to SureSTART Selection Guide
-
Amber Boston Round Glass Bottle. 8oz (240ml) Amber Boston Round with 24-400 White PP Cap and Teflon® Disc attached Cleaned and Certified for Semi-Volatiles 4oz Amber Boston Round with attached 22-400 Black PP Cap and PTFE Disc, Cleaned and Certified for Semi-Volatiles. Related Products: Amber Boston Round Glass Bottles.
-
Jan 29, 2023 · Abstract. Schlenk lines are versatile pieces of laboratory equipment that enable the safe and convenient manipulation of air- and moisture-sensitive compounds. First pioneered in 1913 by Wilhelm Schlenk, the apparatus and techniques used today have evolved considerably, allowing more challenging and sensitive synthetic chemistry to be carried
-
2. During sample collection, if transferring the sample from a collection device, make sure that the device does not come in contact with the sample containers. 3. Place the sample into appropriate, labeled containers. Samples collected for VOC analysis must not have any headspace (see Section 2.1, Volatile Organic Compounds (VOC) Analysis).
-
Click here to read our wide selection of product e-catalogs, brochures, flyers, technical notes, case studies and more!
-
cannulas while inserting into septa and while cleaning and storing them. Safe Handling of Cannula and Needles. A well-crafted documentedsafety plan couldeliminate mostneedle pricks and stabbings. Safety plans should include appropriate hands-on training, a standard operating procedure (SOP), and informa-
-
High-quality borosilicate glass vials, open-top caps, .135" Teflon/silicone septa, pre-cleaned with Certificate of Analysis Each case contains 4 boxes of 72 vials Available in clear and amber and . 0.25 ml 1:1 HCL Preservative, GHS label Made in USA. Related Products: 20 Ml Glass Vials. Compare this item.
-
SciSpec. Supplied with open top polypropylene caps and Teflon®/FDA grade silicone septa Include a polyproylene cap and Teflon/Silicone/polypropylene liner to ensure easier sampling and extraction 1755C64 through 1755C80 are clear; 1755D18 through 1755D28 are amber. Related Products: Glass Bottle Teflon Cap.
Send Your Inquiry
We not only provide a good product, but also provide high quality service. If you are interested in our products,
you can contact us in the following ways.
you can contact us in the following ways.
