Product Category
Teflon septa for research materials
-
.jpg)
Septa, red PTFE/Silicone red PTFE/white silicone, diam. × thickness 8 mm × 1.5 mm, pkg of 100 ea; find Supelco-27097U MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich
-
Vial septa are available in a variety of materials. Septa, PTFE/Silicone (septum diam. × total thickness × PTFE thickness 18 mm × 0.060 in. × 2 mil) are compatible with large amber screw top 30 mL and 60 mL bottle caps. They are suitable for use with most organics (until pierced) and are not recommended for use with chlorosilanes.
-
Supplied with open top polypropylene caps and Teflon®/FDA grade silicone septa Include a polyproylene cap and Teflon/Silicone/polypropylene liner to ensure easier sampling and extraction 1755C64 through 1755C80 are clear; 1755D18 through 1755D28 are amber. Related Products: Glass Bottle Teflon Cap. Compare this item.
-
General Purpose Septa for GC. Aijiren’s general-purpose septa are made from an enhanced injection-molded silicone rubber material. The septa material, dark red or gray in color, is specified to withstand over 200 automatic injections at an injection port temperature of 350 °C. You can have confidence in your chromatographic results knowing
-
Septa are available with two or even three layers of material. PTFE / Silicone septa (T/S) are the most useful for HPLC applications as they have wide chemical compatibility and low extractables
-
General description. The Corning silicone septa fit into open top PBT caps (No. CLS139545HTSC) with GL45 threads to allow for aseptic reagent delivery or culture sampling using a syringe and needle. They can be autoclaved at 121°C or dry heat sterilized at up to 180°C.
-
Septa can be made from a range of materials including PTFE, silicone, red rubber, fluoroelastomers, and butyl to name a few. The materials are layered together in one of three options: • Single layer: Usually made from red rubber or PTFE for one use only • Bi-layer: Made from two distinct materials – one to create
-
Jan 29, 2023 · Abstract. Schlenk lines are versatile pieces of laboratory equipment that enable the safe and convenient manipulation of air- and moisture-sensitive compounds. First pioneered in 1913 by Wilhelm Schlenk, the apparatus and techniques used today have evolved considerably, allowing more challenging and sensitive synthetic chemistry to be carried
-
Catalog number: 31303211. Ensure optimal performance of your GC instrument with bleed and temperature optimized Thermo Scientific™ BTO and TR-Green Septa. Made of low-bleed silicone, these septa have excellent mechanical properties, are ideal for demanding GC-MS applications, and may be used reliably up to 400 °C. 48 (Blister Pk.)
-
The Aijiren Technologies inlet septa is made from strong silicone material and works well even at 35 degree C temperatures. This septa is compatible to use with , , 4890, , , GC columns. Application: For , , 4890, , , GCs This product is only available to. Compare this item.
-
These septa often emit specific volatile organic compounds (VOCs) confounding the measurement results of breath samples. In the current paper, 14 different brands of magnetic caps with silicone–polytetrafluoroethylene (PTFE), butyl–PTFE, or butyl rubber septa were tested. The total emission of septa over a 4 h period was also evaluated.
-
Tuf-bond Septa (9711D10 to D45) Thickness: 100 mils Of silicone rubber with PTFE facing 10 mils thick Septa of butyl rubber, silicone rubber or rubber-laminated PTFE are available on special order. Septum diameter indicated in listings. Related Products: Screw Cap With Septum. Compare this item.
-
material. PTFE face, silicone body, tan PTFE/silicone septa, white silicon nitride septa. material. PTFE face, silicone body, transparent PTFE/silicone . material. PTFE face, PTFE septum face (PTFE 0.010" thick), PTFE/silicone , silicone body. material. PTFE face, blue PTFE/silicone , silicone body
-
-40 °C -40 °C -60 °C natural rubber/TEF natural rubber/TEF; butyl/PTFE red rubber/ PTFE silicone/ PTFE Thin, fragile needle? Soft and thin septa required e.g. silicone/ PTFE Blunt, thick needle? Slit/pre- cut liner as penetration aid (HPLC) silicone/ PTFE, slit Critical analysis? Very clean liner required
-
The Finneran 9 mm septa in white color, is mainly used with screw thread closures for tight sealing of the stored sample. It is mainly used in research laboratories or in chemical industries. This septa is made of sturdy PTFE material which ensures long lasting usage and durability.
Send Your Inquiry
We not only provide a good product, but also provide high quality service. If you are interested in our products,
you can contact us in the following ways.
you can contact us in the following ways.
