Product Category
septum cap with high quality for Waters HPLC Aijiren
-
An Aijiren Septum is Not Just a Septum White Paper The septum is one of the three main components of your sample containment system, consisting of the vial, septum, and cap. The septum is highlighted in red in Figure 1. Autosampler needle Septum Cap Vial
-
screw caps are available through Waters. This screw cap has a PTFE/silicone septum bonded to the polypropylene cap, using a non-solvent bonding process. This bonding technology is designed to keep the septum/cap together during shipment and assembly
-
It is a high-quality choice for HPLC experimental analysis. 4ml 13-425 Screw Vial for HPLC Autosampler 4ml 13-425 screw thread Vial Made of Clear, Type 1 Class A or Amber, Type 1 Class B borosilicate glass,Requires the use of 13-425 closures and 13mm septa.
-
Waters WAT011695 Nova-Pak C18 Column, 60Å, 4 µm, 3.9 mm X 300 mm and Waters TruView 186005663CV TruView LCMS Certified Clear Glass 12 x 32 mm Screw Neck Total Recovery Vial, with Cap and Preslit PTFE/Silicone Septum, 1 mL Volume.
-
High quality, pure silicone is laminated to 0.005” thick PTFE to give a pure, highly inert septum with excellent resealing characteristics even after repeated punctures. PTFE/Silicone septa are the preferred product for use in most HPLC and GC applications where
-
1. 4mL 13-425 Screw Neck Vial ND13 can be used for GC and HPLC. 2. Made from advanced technology and excellent raw materials. 3. Assembled with cap and septa , use them instantly to save your time. 4. There are two kinds of colors, glass and amber. 5.
-
High Quality 9mm HPLC Vials for Sale Screw thread closures N9 (9mm) 2ml vials and closures are universally suitable on most autosamplers, convenient in handling, and available in a broad selection of different cap colors and septum materials.
-
Waters screw vials & caps 22 Wash vials 23 Crimptronic - electronic crimper 24 Manual crimping & de-capping tools 25 Hard-polyethylene vial racks 25 Headspace screw vial with magnetic screw cap 26 Headspace vials & caps 27 VMax-Vial - the big “Vase” for
-
Buy amber vials with caps with high quality for HPLC These amber vials are ideal when there is no need for child-resistant closures. They are high-quality snap-cap vials with white caps. They feature an interlocking head design on the top of the vial that assures
-
Waters Vials elections. Waters offers a selection of pre-assembled . vials with cap and pre-slit PTFE/Silicone septum for use in the Waters Alliance HPLC Dissolution System. The vials come ready to use, freeing the resources in your lab to be more productive. Pre
-
Waters laboratory vials for HPLC system with high quality Water Used for HPLC SHIMADZU (laboratory vials supplier Corporation) It is best to use water from an ultra-pure water production system with specific resistance of 18 MΩ·cm or greater.
-
Hplc Waste Container found in: MS Waste Container, LC Waste Container (5L), VapLock Waste Funnels, EZwaste® Solvent Waste System, VapLock Solvent Waste.. The new and improved CG-1167 HPLC Cap system provides the safest and most economical way of storing high performance, low pressure liquid chromatography mobile phase, sparging preventing bubbles from entering the system as well as
-
5 • TN140: Solvent Quality • The quality of the eluent is very important to keep the noise as low as possible • Make sure that the eluents are good by running them without injection (sample type "Blank“) • For MS and Thermo Scientific Corona charged aerosol
-
Blue, 12 x 32 mm Screw Neck Cap and Preslit PTFE/Silicone Septum, 100/pk As a part of Waters’ wide selection of vials, caps, and other sample accessories, this blue polyethylene screw cap is compatible with a range of vials and other products.Screw caps are
Send Your Inquiry
We not only provide a good product, but also provide high quality service. If you are interested in our products,
you can contact us in the following ways.
you can contact us in the following ways.
