Common use 2ml hplc autosampler vials with closures for hplc system
2 Ml Plastic Vials at Thomas Scientific
and 6133 vials. To use 3127 vials in 8000D, 8012 adapter is also necessary. Plastic Vial Clamp Adapter for 8000D: Required when running 8010 adapter with vials 1 in. (25.4 mm) in length (3111, 3114, 3117) or when running 3127 vials with 8011 adapter in the 8000D. Agate Vial Set: For
Vials - Fisher Scientific
Autosampler Vials Crimpers and Decappers; Autosampler Vials, Caps, and Closures; Chromatography and Mass Spectrometry Reagents; Chromatography Columns and Cartridges; Chromatography Syringes; Chromatography Water; Gases and Gas Accessories; Paper Chromatography Products; Solid Phase Extraction Products; TLC Products
News-9-Aijiren HPLC Vials
2ml amber autosampler vial,12mm Diameter,32mm Height,9-425 screw top.Our vials with caps are widely used in standard HPLC and GC applications.The vials can be used on all common autosamplers due to their technical geometry, preferentially they are found on Aijiren, HTA, Shimadzu, Thermo, Varian, Waters, etc.
Autosampler Vials, Caps and Closures | Fisher Scientific
Autosampler Vials, Caps and Closures Thermo Scientific™ 20 mm Headspace Glass Vials Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish.
Trifluoroacetic Acid, Optima LC/MS Grade, Fisher Chemical
Inhalation may cause central nervous system effects. Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Hygroscopic. Use personal protective equipment. Use only under a chemical fume hood. Wash off immediately with plenty of water for at least 15 minutes. Immediate medical attention is required.
Tubes and Vials - Fisher Sci
Closures can be simple stoppers, screw-tops, push-tops, snap-tops or crimp-tops. Tubes and vials may be supplied sterile (especially for cell culture or microbiological applications) or non-sterile for more general laboratory use. They can also be graduated with write-on patches for labelling.
ND15 8ml HPLC Vials
ND15 8ml HPLC Vials. 15mm screw thread caps, septa, and vials are designed especially for use with Aijiren's and other rotating or robotic arm samplers 8ml, 16.6X60mm vials are manufactured of Clear. Type 1 Class A or Amber, Type 1 Class B borosilicate glass
Autosampler Compatibility Table Vials and Closures
Vials and Closures >> Autosampler Compatibility Manufacturer Model 8mm Crimp 11mm Crimp and Snap 8-425 Screw 9mm Short Screw 10-425 Screw Shell Vials 13-425 Screw and Crimp Headspace Plate Thermo Scientifi c TriPlus HS, TriPlus SPME • Surveyor (Surveyor Plus) •••• • • Accela High Speed LC Autosampler (200 Pos.) ••••
HPLC Vial With Insert at Rs 3/onwards | Hplc Vial | ID
Our autosampler vials and caps are supplied high quality , ensuring that with vials from us will achieve consistent, reliable and reproducible results time after time. Our vials and caps are fully guaranteed to work in your autosampler. We offer a full range of 2ml, 4ml, 10ml, up to 20ml vials and above, including VOA and EPA vials at 40mls.
Routine Vials and Caps | Thermo Fisher Scientific - SG
Thermo Scientific Routine Vials and Caps are ideal for use in most standard HPLC and GC applications and high-throughput analyses. These quality autosampler vials and caps provide consistent results for your standard and high-throughput pharmaceutical, environmental, and food and beverage applications.
HPLC Consumables - HPLC Liquid Flowmeter Manufacturer from Mumbai
9-425 autosampler screw thread amber 2ml glass vials for hplc . Item. Detailed Description. Vials. 2mL Clear Glass 12x32mm Flat Base 9-425 Screw Thread Vial. 100pcs/pk. 2mL Clear Glass 12x32mm Flat Base 9-425 Screw Thread Vial with with White Write-on Patch and Graduation Lines. 100pcs/pk. 2mL Amber Glass 12x32mm Flat Base 9-425 Screw Thread
HPLC Vials Micro-Inserts, hplc vial inserts, insert vial
1-4mL Autosampler Vials for HPLC, UPLC, GC 1.5mL 8-425 Screw Neck Vial ND8 1.5mL 9mm Short Thread Vial ND9 1.5mL 10-425 Screw Neck Vial ND10 1.5mL 11mm Snap Ring Vial ND11 1.5mL 11mm Crimp Ring Vial ND11 4mL 13-425 Screw Neck Vial ND13 1mL Shell Vial Micro-Inserts Vial Racks Hand Crimper, Decrimper
Screw Top Vials, Caps and Kits | Thermo Fisher Scientific - US
Screw thread vials & closures for HPLC, GC, MS applications. There’s a Thermo Scientific screw top vial for every HPLC, GC, MS instrument, application, and budget. Our screw top clear and amber glass vials and plastic screw top vials are available in 8mm, 9mm, 10mm, and 13mm screw threads.
What minimum volume of sample should be in a HPLC vial (2ml
I need to use small amount of sample for HPLC analysis, so just curious what is a minimum amount of a sample I may put in a 2 ml vial, so that it can be accessed by an injector?
1.5mL Glass 5.0 Screw Neck Vial, 8-425 Thread, 11.632mm
5.0 type: High Borosilicate glass: . 5x10-6 x10 K-1 (20~300 C) Economy Type For Test and Save Samples 1.8-425 Standard autosampler vials(11.6*32mm) for GC and HPLC. 2.Available with black or white screw caps with 8-425 thread. 3.Available as closed top screw seals or with centre hole. 4.Vials are manufactured of Clear or Amber borosilicate glass 1) 8mm screw vials can be used on all common
you can contact us in the following ways.
-
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 11mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: HPLC and GC system
Volume: 4ml (standard volume)
Dimensions: 15 x 45mm
Neck Diameter: 13mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Water analysis
Qty/Pack: 25pcs/pack or 100pcs/pack
Dimensions: 16 x 100mm
Neck Diameter: 16mm
Volume: 12ml
Payment: T/T
MOQ: 1 pack -
Dimensions: 27.5 x 57mm/27.5 x 75mm/27.5 x 95mm/27.5mm x 140mm
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Environmental analysis
Neck Diameter: 24mm
Qty/Pack: 100pcs/pack
Volume: 20-60ml
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Dimensions: 16.6 x 60mm/18.5 x 65mm
Application: Environmental analysis
Neck Diameter: 15mm
Qty/Pack: 100pcs/pack
Volume: 8-12ml
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Dimensions: 22.5 x 46mm/22.5 x 75mm
Application: GC system
Neck Diameter: 18mm
Qty/Pack: 100pcs/pack
Volume: 10-20ml
Payment: T/T
MOQ: 1 pack -
Material: Nylon; Hydrophilic PVDF; Hydrophilic PTFE; Hydrophobic PTFE; PES; MCE; Hydrophilic PP; Cellulose Acetate(CA)
Qty/Pack: 100pcs/pack
Application: Filter
Payment: T/T
MOQ: 1 pack -
Application: Suitable for 8-425, 9mm, 10-425, 11mm snap vials
Material: Glass for Insert, Polymer for feet
Dimensions: 5x29mm,5x31mm/5.7x29mm,5.7x31mm
Capacity: 150-250uL
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack