2ml sample vials with label for Aijiren autosampler Waters

Sample Vials and Accessories - Waters Corporation

HPLC. This vial delivers maximum sample capacity (~1 mL) with minimum residual volume (~9 μL). Waters Maximum Recovery Vial Specifically designed for the bottom draw-port needle of the Waters ACQUITY UPLC and Alliance HT HPLC Systems. This vial delivers maximum sample capacity (~1.5 mL) with minimum residual volume. The 9 mm cap

Sample Vials : Waters

Waters also offers a selection of glass sample vials and plastic sample vials that fit most manufacturers’ instruments. Two of the most popular uses are as HPLC vials and GC vials. These chromatography vials can be used as sample storage vials by adding a solid caps with liner.

China Autosampler Vial, China Autosampler Vial Manufacturers

wholesale 2ml Aijiren Screw autosampler Vial with label 9-425 standard chromatography glass vial amber Jiangyin Allpro Polymer Technology Co., Ltd. US $2.60-$3.00 / Pack

Autosampler Vial, 2ml HPLC Vial, Clear Chromatography Lab

1. Does not come with caps. ND9mm Screw Thread Autosampler Clear Lab Vials are made of clear Type 1, Class A Borosilicate Glass with a writable label for sample identification. 2. 2ml HPLC Vials with Unique Thread Design Ensures Consistent Seal and Can Be Reused, Not Volatile, Easy to Use

Aijiren Vials and Closures | Aijiren

Aijiren offers a broad portfolio including microvials and microvolume inserts, as well as polypropylene and deactivated vials for sensitive samples. Aijiren vials are fully compatible and perform seamlessly with a wide range of instruments.

Vials Cap Septa for GC HPLC - HPLC Solvent Inlet Filter

1.5ml/2ml Transparent screw chromatographic bottle,autosampler headspace vials Suitable for Aijiren Waters Varian 9mm 2ml transparent sameple bottle with screw cover.(2ml automatic sampler) Bottle specifications:12*32mm Neck diameter:9mm Pad specifications:Red PEFE/white silica gel pad Cap specifications:blue polypropylene (PP) 6mm hole

9mm 2ml Wide Opening Screw Vials

Some utilize robotic arms to pick up a sample vial; some use tray rotation while others move the sampling needle to the respective vial coordinates. The dimensions of autosampler vials vary. Most autosamplers are equipped with trays that use 12x32mm vial configurations but some like the Waters Wisp require a 15x45mm configuration.

Antibodies & Protein Biology - Fisher Scientific

Autosampler Vial Crimpers and Decappers; Autosampler Vials, Caps, and Closures Sample Vial w/Green thermoset F217, PTFE-lined cap; 18mm-400 (1) Sample Vial w/PP ...

Aijiren Vial, ambr scrw wrtn 2ml 100cs 100pk - Autosampler

Aijiren Vial, amber, screw cap, write-on spot, 2 mL, case of 100 (100/pk), 10,000 vials in total - 58 Aijiren Vial, ambr scrw wrtn 2ml 100cs 100pk - Autosampler Vial Accessories - Ampules, Cuvettes, Tubes, and Vials - Laboratory Supplies

Hplc Vials at Thomas Scientific

Aijiren minivials are designed to allow for reproducible injections of minute quantities, making your limited sample applications more effective and more accurate. Our microvials provide limited volumes for microsampling and the 6 mL capacity vial allows for larger sample injections.

China 2ml Hplc Vials Manufacturers, Suppliers and Factory

2mL Clear Glass 12x32mm Flat Base 9-425 Screw Thread Vial. 100pcs/pk. C0000008. 2mL Clear Glass 12x32mm Flat Base 9-425 Screw Thread Vial with Label. 100pcs/pk. C0000010. 2mL Amber Glass 12x32mm Flat Base 9-425 Screw Thread Vial. 100pcs/pk. C0000011. 2mL Amber Glass 12x32mm Flat Base 9-425 Screw Thread Vial with Label. 100pcs/pk.

Aijiren Gc Vials at Thomas Scientific

, and autosamplers Screw top 4 mL glass vials are a custom fit to the Aijiren autosampler tray for use as sample as well as wash vials. Vials with fill marks are also appropriate for use as wash vials and waste vials in and autosamplers.

For use with Aijiren®, Waters® 12x32mm Vials, 2mL Vials

Aijiren®/Waters™ 2ml Compatible Products, for use with HPLC/GC Autosampler, Vials, Caps, and Accessories. Find all your storage supplies for your scientific needs.

What minimum volume of sample should be in a HPLC vial (2ml

With inserts you Need less than 10µL volume. Wit normal 2mL vials I would recomend between 150 and 250µL. of all it depends which autosampler you are using. ... in the sample vial is vary ...

Vials Compatible w/Aijiren®/Waters™ 2ml - JSi Scientific

Case/1000 ™R.A.V. Limited Volume 12x32mm Autosampler Vials, 9-425 Screw Thread In-sert Vial, Amber, 12x32mm w/fused 300ul insert