2ml sample vials with high quality for liquid autosampler with label
Vials, Plates, and Certified Containers : Waters
Autosampler ready formats for small sample volumes. Sample Vials Wide selection of vials, including HPLC Certified vials (tested by HPLC for cleanliness) and LCMS Certified vials (tested for total ion count and presence of clusters in the high mass range).
companies, Vials-IndiaBizClub
Tigecycline 50mg Vial Cefepime 1g, 2g, 500mg & 250mg Vials Cefepime & Tazobactam 1g 125mg/ 500mg 62.5mg / 250mg 31.25mg Vials Imipenem & Cilastatin 250mg / 500mg Vials Lyophilized Ertapenem sodium 1g IV/IM Vial Cefoperazone & Sulbactam (2:1) 1.5g, 3g Vials Piperacillin Sodium & Tazobactam Sodium 2.25g / 4.50g Vials Netilmicin Sulphate 10 / 25 / 50 / 100 / 200 / 300mg Amps.
Autosampler Vials, Caps and Closures | Fisher Scientific
Autosampler Vials, Caps and Closures Thermo Scientific™ 20 mm Headspace Glass Vials Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish.
Shop All Autosampler Vials & Kits | Thermo Fisher Scientific
For use with snap caps or aluminum crimp seal closures, these high-quality 11mm amber glass vials are 2mL, 12x32mm and fit most brands of autosamplers. Made of superior quality 51A (Type 1, Class B), they meet all requirements of US, EU, JPN Pharmacopia.
Nalgene® cryogenic vials capacity 2.0 mL, sterile, External
Sterile vials and closures are pre-assembled and radiation-sterilized. A white marking area, fill line and graduations are printed on the side. Certified sterile, non-cytotoxic and non-pyrogenic. Note: Do not use cryogenic vials for storage in the liquid phase of liquid nitrogen unless correctly sealed in Nunc CryoFlex ™ tubing. Such use may
2ml Hplc 9-425 Screw Autosampler Vial For Aijiren Instrument
2ml autosampler vial,12mm Diameter, 32mm Height, 9-425 screw top, and included blue ABS Screw Cap & Septa (White PTFE/Red Silicone Liner) Standard Autosampler Vial for HPLC & GC Chromatography, vials can be used for high performance liquid chromatography and gas chromatography for reliable analysis results
jual 100Pcs/Set 2ml Graduated Clear Sample Vials Autosampler
2. Sample vials with unique thread design ensures consistent seal and can be reused, not volatile, easy to use.3. Standard autosampler vial for HPLC GC Chromatography, vials can be used for high performance liquid chromatography and gas chromatography for reliable analysis results.4. The writable label can be used for sample identification.5.
Vial Labels at Thomas Scientific
Cryogenic dot labels are ideal for labeling 0.2ml PCR tube tops, 0.2ml PCR tube caps, 0.2ml PCR tubes, 0.2ml PCR vial caps. These labels can withstand high temperatures at +110°C and the labeled PCR vials can be placed inside PCR thermo cycler and PCR machines and undergo the complete PCR cycle.
Cannavials™ 2mL Amber Autosampler Vials
Cannavials™: Quality you can rely on. A brand you can trust. Cannavials™ are the perfect 2mL vials for your autosampling needs! These well-made vials have many features that will work for you:-Sturdy construction (high-quality Borosilicate)-Write-on area on the side-Graduated; markers at 0.5mL, 1.0mL and 1.5mL-Screw-top
Target 2mL Crimp Top Vials | General Laboratory Supply, Inc.
Autosampler Vials. 1.5 mL Target Snap-It High Recovery Vials; 1.5ml High Recovery Snap-It Vials; 2mL Pre-Assembled Target Vial Kits Sample Vials with Rubber Lined ...
The 10 Best Lab Chromatography Sample Introduction Supplies
1. ND9mm Screw Thread Autosampler Amber Lab Vials are made of clear Type 1, Class A Borosilicate Glass with a writable label for sample identification. 2. 2ml HPLC Vials with Unique Thread Design Ensures Consistent Seal and Can Be Reused, Not Volatile, Easy to Use; 3. 2ml Capacity,12x32 mm Dimensions, Screw Thread 9-425 9mm Neck,100/pack; 4.
Autosampler Vials | Screening Devices BV
Standard 2ml (12 x 32mm) vials are compatible with every autosampler. The vials have a screw-, snap- or crimp-cap neck in 8-9-10 mm. Also available vials for optimized microsampling, with up to 5ul low recovery.
2ml Amber Sample Vials – Aromatherapy Essentials
2ml Amber Sample Vials We have reduced our eco footprint! Our 1ml and 2ml sample vials now come packaged in a FREE reusable felt storage purse to keep your vials safe! *style of bag may vary
Aijiren Amber Glass Flat Base Vial, 11mm Wide Opening Crimp
11mm Wide Opening Crimp Top Autosampler Vials are made of clear Type 1, Class A Borosilicate Glass with a writable label for sample identification. 2ml Amber autosampler vial,12mm Diameter, 32mm Height Optimal design for Robotic Maneuverability,Wider mouth eliminates miised injections
Sample Vials | General, Micro Sampling | Fisher Scientific
Micro sampling vials and closures for smaller sample sizes up to 2mL Most sample vials are flat-bottomed with straight sides for stability on the bench, although dedicated vial racks can be used. Sample vials are often profiled to minimise dead volumes above the sample surface.
you can contact us in the following ways.
-
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 11mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: HPLC and GC system
Volume: 4ml (standard volume)
Dimensions: 15 x 45mm
Neck Diameter: 13mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Water analysis
Qty/Pack: 25pcs/pack or 100pcs/pack
Dimensions: 16 x 100mm
Neck Diameter: 16mm
Volume: 12ml
Payment: T/T
MOQ: 1 pack -
Dimensions: 27.5 x 57mm/27.5 x 75mm/27.5 x 95mm/27.5mm x 140mm
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Environmental analysis
Neck Diameter: 24mm
Qty/Pack: 100pcs/pack
Volume: 20-60ml
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Dimensions: 16.6 x 60mm/18.5 x 65mm
Application: Environmental analysis
Neck Diameter: 15mm
Qty/Pack: 100pcs/pack
Volume: 8-12ml
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Dimensions: 22.5 x 46mm/22.5 x 75mm
Application: GC system
Neck Diameter: 18mm
Qty/Pack: 100pcs/pack
Volume: 10-20ml
Payment: T/T
MOQ: 1 pack -
Material: Nylon; Hydrophilic PVDF; Hydrophilic PTFE; Hydrophobic PTFE; PES; MCE; Hydrophilic PP; Cellulose Acetate(CA)
Qty/Pack: 100pcs/pack
Application: Filter
Payment: T/T
MOQ: 1 pack -
Application: Suitable for 8-425, 9mm, 10-425, 11mm snap vials
Material: Glass for Insert, Polymer for feet
Dimensions: 5x29mm,5x31mm/5.7x29mm,5.7x31mm
Capacity: 150-250uL
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack