Home » News » 2ml Autosampler Vials » 2ml sample vials with closures for hplc system Waters

2ml sample vials with closures for hplc system Waters

Material: USP Type 1, Class A, 33 Borosilicate Glass Volume: 2ml (standard volume) 1.5ml(actual volume) Application: HPLC and GC system Dimensions: 11.6 x 32mm Neck Diameter: 9mm Qty/Pack: 100pcs/pack Payment: T/T MOQ: 1pack
Tel/Whatsapp: +8618057059123
Share us:

2 mL Large Opening Vials from Supelco | Sigma-Aldrich

2 mL Large Opening Vials from Supelco. Our wide opening 2 mL vial is 12 mm in diameter, 32 mm in height, and has a 6.0 mm opening. The thread on this vial is 10-425

Aijiren 2ml 9mm HPLC Vial, Clear Autosampler Vial, 1.8ml

3. 2ml Clear autosampler vial,12mm Diameter, 32mm Height, 9-425 9mm screw top, and included blue ABS Screw Cap & Septa (White PTFE/Red Silicone Liner) 4. Standard Autosampler Sample Vial with Writing area for HPLC & GC Chromatography, vials can be used for high performance liquid chromatography and gas chromatography for reliable analysis results

Generic HPLC 2ml vials ok to use in Acquity system? — Waters

As you've read, of course you COULD use non-Waters vials with your UPLC system. That said, there are a couple scientific/practical reasons why we strongly recommend using Waters vials: 1. A self-venting septum increases the accuracy of sample draw.

9-425 1.5/2ml Amber Screw Thread Hplc Gc Laboratory

Zhejiang Aijiren, Inc. was founded in 2007, specializing in Chromatography consumables more than 11years,Such as hplc/gc ,MS autosampler Screw/Crimp/Snap vials,closures, caps, and septa,inserts and other accessories,The enterprise covers more than 10000 square meters, and has clean workshop more than 2000 square meters.

Sample Vials, vials, PTFE silicon septa, 2ml Sample Vials

Introduction. MS ® 2ml Sample vials improve your laboratory productivity, by reducing costs and saving time. The cleanest on the market, these products considerably reduce the risk of test results compromised by ghost peaks, damaged needles or dislodged septa, decreasing analysis failures and sample reruns.

What minimum volume of sample should be in a HPLC vial (2ml

Wit normal 2mL vials I would recomend between 150 and 250µL. in particular how long needle will insert into the sample vials. ... High-performance liquid chromatography (HPLC) analysis method

The importance of vial composition in HPLC analysis: An

Among the glass vials tested, for the best case (vial A) 1% epimer was observed after one week, and for the worst case (vial B) 29% epimer was observed after one week. For this particular application vial A, the certified Waters vial, had the best performance for maintaining the solution stability among the glass vials tested. 3.2.

HPLC and GC Vials, Caps, Septas and Inserts Guide

Amber 9mm HPLC Vials with Insert . Crimp closures N11 are also universally suitable with regard to autosampler compatibility, however, they are not as safe and convenient in their closing technique as the screw closures N 9 (9mm) 2ml vials and closures.

Vials - Fisher Sci

Vials Thermo Scientific™ Nunc™ Biobanking and Cell Culture Cryogenic Tubes Store samples from general cold storage to the vapor phase of liquid nitrogen with Thermo Scientific™ Nunc™ Biobanking and Cell Culture Cryogenic Tubes.

Vial Racks from Aijiren - Crawford Scientific

Crawford Scientific Ltd Holm Street Strathaven Lanarkshire ML10 6NB. T: +44(0)1357 522961 F: +44(0)1357 522168. Part of the arch sciences group

Autosampler Vials & Caps for HPLC & GC | Thermo Fisher

*Premium vials & closures: Our premiere quality product offering **Routine vials & closures: Vials & closures that balance quality and cost for standard, routine applications ***Inert vials: Ultra-high quality for ultra-low adsorption and ultra-low pH shift

Autosampler Vials, Caps and Closures | Fisher Scientific

Autosampler Vials, Caps and Closures Thermo Scientific™ 20 mm Headspace Glass Vials Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish.

China Auto Sample Vials manufacturer, Caps, 18mm Silver

China Auto Sample Vials supplier, Caps, 18mm Silver Manufacturers/ Suppliers - Zhenjiang Jie Dao Instrument Technology Co. Ltd.

ND15 8ml HPLC Vials

These vials are recommended for short term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal. Shell Vials are an economical alternative to screw thread vials for Water’s HPLC autosamplers or any other autosampler that doesn’t use a robotic arm to move the vials.

Hplc Vials at Thomas Scientific

/ blunt HPLC needles Snap ring vials may alternatively also be crimped with 11 mm crimp closures, if used for GC purposes Packed with 100 pieces in a resealable, tamper-evident zip-lock bag Closures can be ordered as single components or - along with a vial of your choice - as a Vial Kit in…

Send Your Inquiry
We not only provide a good product, but also provide high quality service. If you are interested in our products,
you can contact us in the following ways.
Your name:
Your email:
Your phone:
Your inquiry:
Related Products
  • Material: USP Type 1, Class A, 33 Borosilicate Glass
    Volume: 2ml (standard volume) 1.5ml(actual volume)
    Application: HPLC and GC system
    Dimensions: 11.6 x 32mm
    Neck Diameter: 11mm
    Qty/Pack: 100pcs/pack
    Payment: T/T
    MOQ: 1 pack

  • Material: USP Type 1, Class A, 33 Borosilicate Glass
    Application: HPLC and GC system
    Volume: 4ml (standard volume)
    Dimensions: 15 x 45mm
    Neck Diameter: 13mm
    Qty/Pack: 100pcs/pack
    Payment: T/T
    MOQ: 1 pack

  • Material: USP Type 1, Class A, 33 Borosilicate Glass
    Application: Water analysis
    Qty/Pack: 25pcs/pack or 100pcs/pack
    Dimensions: 16 x 100mm
    Neck Diameter: 16mm
    Volume: 12ml
    Payment: T/T
    MOQ: 1 pack

  • Dimensions: 27.5 x 57mm/27.5 x 75mm/27.5 x 95mm/27.5mm x 140mm
    Material: USP Type 1, Class A, 33 Borosilicate Glass
    Application: Environmental analysis
    Neck Diameter: 24mm
    Qty/Pack: 100pcs/pack
    Volume: 20-60ml
    Payment: T/T
    MOQ: 1 pack

  • Material: USP Type 1, Class A, 33 Borosilicate Glass
    Dimensions: 16.6 x 60mm/18.5 x 65mm
    Application: Environmental analysis
    Neck Diameter: 15mm
    Qty/Pack: 100pcs/pack
    Volume: 8-12ml
    Payment: T/T
    MOQ: 1 pack

  • Material: USP Type 1, Class A, 33 Borosilicate Glass
    Dimensions: 22.5 x 46mm/22.5 x 75mm
    Application: GC system
    Neck Diameter: 18mm
    Qty/Pack: 100pcs/pack
    Volume: 10-20ml
    Payment: T/T
    MOQ: 1 pack

  • Material: Nylon; Hydrophilic PVDF; Hydrophilic PTFE; Hydrophobic PTFE; PES; MCE; Hydrophilic PP; Cellulose Acetate(CA)
    Qty/Pack: 100pcs/pack
    Application: Filter
    Payment: T/T
    MOQ: 1 pack

  • Application: Suitable for 8-425, 9mm, 10-425, 11mm snap vials
    Material: Glass for Insert, Polymer for feet
    Dimensions: 5x29mm,5x31mm/5.7x29mm,5.7x31mm
    Capacity: 150-250uL
    Qty/Pack: 100pcs/pack
    Payment: T/T
    MOQ: 1 pack