2ml sample vials with cap for HPLC sampling USA
MS Certified and Certified Vial Kits | Thermo Fisher
No risk for exctractables, no risk of losing valued sample by taking the wrong vial and closures, which might not be compatible with the sample or solvent. Each lot of certified kits is tested by HPLC/UV and GC/MS against 15 critical parameters.
Essential Oil Sample Vials & Containers
1/6 dram Clear Glass Sample Vials and Dabber Caps with Clips (Pack of 12) Rating: 97%. 24 Reviews. $2.40 As low as $2.04. Out of stock. Add to Wish List Add to
Vials | VWR
Description: Vials are specifically designed with a crimp cap profile for robotic arm autosamplers but have easy-to-use screw-thread caps. Certificates ,46610-724CS,46610-724PK,10803-888PK,82030-976PK,10781-890PK,89239-030CS,82030-972PK,46610-722CS,46610-722PK
Glass Sample Vials - Qorpak
A wide selection of caps is available attached or purchased separately. Choose from our standard screw thread glass sample vials or the wider mouth short compound vials. For cost-effective pre-cleaned sample vials, see our selection of vacuum and ionized vial kits. Other pre-cleaned glass samples vials, including vials cleaned for VOA (volatile
Vials & Caps | Glass and Plastic Vials | LC Caps and Septa
Our portfolio consists of GC vials and LC vials, GC caps and LC caps, and GC septa and LC septa. Through our biological line, we offer glass and plastic vials for optimal measurement of samples by liquid scintillation counting. Our glass vials are chemically-inert, making them suitable for use with aggressive reagents and solubilizers.
2ml gas chromatography automatic sampling bottle transparent
Product Information. Vial Height(mm). Writing Area. Email to friends Share on Facebook - opens in a new window or tab Share on Twitter - opens in a new window or tab Share on Pinterest - opens in a new window or tab
Amazon.com: Autosampler Vials - Lab Vials: Industrial
Autosampler Vials 2ml with Caps, HPLC Vial,9-425 Clear Vial with Blue Screw Caps,Writing Patch,Graduation,White PTFE & Red Silicone Septa Fit for GC Sample Vial. by Nextirrer. $21.99$21.99 - $95.00$95.00. FREE Shipping on eligible orders. Some sizes/colors are Prime eligible.
Aijiren Automatic Liquid Samplers
Capping sample vials 3 Capping sample vials When a tray is not installed, you may be able to use sample vials with no caps, snap-on caps, or screw-on caps depending on your application. If a tray is used, sample vials must have caps installed. See Figure 2. To install the airtight crimp caps: 1. Clean the inside surfaces of the crimper jaws. 2.
2 mL Screw Top Vials and Caps | Aijiren
Aijiren 2 mL screw top vials are constructed from from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. The associated 9 mm screw caps and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber.
Sample Vials | VWR
Nonsterile or sterile vials are available in amber, white, or clear transparencies for effortless viewing. Open-top, closed-top, or screw-on caps styles may incorporate liners or pre-slit septas for easy specimen retrieval. Autoclavable sample vials designed for maximum recovery will eliminate liquid sample waste.
2 Ml Vial at Thomas Scientific
Big Mouth Vial, 2.0 mL Volume, 12 mm Diameter x 32 mm Height Unassembled Convenience Packs with closures/septa, 10-425 mm Complete components Easy choice Clear or amber vials Components (vial, cap/seal and liner) are packaged, unassembled or assembled, in clear trays or bags,
Glass Vial 2ml at Thomas Scientific
Wheaton Sample Vials, 2mL or 0.07oz, Clear, 8-425 Finish with 14B Rubber Liner, Type I Borosilicate Glass (2 mL E-C Vial, Glass Clear, 8-425 Rubber Lined Cap)2 mL E-C Vial, Glass Clear, 8-425 Cap, Rubber. Wheaton Glass E-C Sample Vial, with Phenolic Teflon-Faced Rubber Lined Cap Packaged Separately.
Sample Vials : Waters
Waters also offers a selection of glass sample vials and plastic sample vials that fit most manufacturers’ instruments. Two of the most popular uses are as HPLC vials and GC vials. These chromatography vials can be used as sample storage vials by adding a solid caps with liner.
2 ml vials | Sigma-Aldrich
Search results for 2 ml vials at Sigma-Aldrich. Compare Products: Select up to 4 products. *Please select more than one item to compare
2.0 mL Impact Resistant Screw Cap Tube - USA Scientific, Inc
2.0 mL Impact Resistant Screw Cap Tube Item #1420-9600 Impact resistant, self-standing 2.0 mL screw cap microcentrifuge tubes are designed to withstand the rigors of bead beating extractions or homogenization.
you can contact us in the following ways.
-
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 11mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: HPLC and GC system
Volume: 4ml (standard volume)
Dimensions: 15 x 45mm
Neck Diameter: 13mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Water analysis
Qty/Pack: 25pcs/pack or 100pcs/pack
Dimensions: 16 x 100mm
Neck Diameter: 16mm
Volume: 12ml
Payment: T/T
MOQ: 1 pack -
Dimensions: 27.5 x 57mm/27.5 x 75mm/27.5 x 95mm/27.5mm x 140mm
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Environmental analysis
Neck Diameter: 24mm
Qty/Pack: 100pcs/pack
Volume: 20-60ml
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Dimensions: 16.6 x 60mm/18.5 x 65mm
Application: Environmental analysis
Neck Diameter: 15mm
Qty/Pack: 100pcs/pack
Volume: 8-12ml
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Dimensions: 22.5 x 46mm/22.5 x 75mm
Application: GC system
Neck Diameter: 18mm
Qty/Pack: 100pcs/pack
Volume: 10-20ml
Payment: T/T
MOQ: 1 pack -
Material: Nylon; Hydrophilic PVDF; Hydrophilic PTFE; Hydrophobic PTFE; PES; MCE; Hydrophilic PP; Cellulose Acetate(CA)
Qty/Pack: 100pcs/pack
Application: Filter
Payment: T/T
MOQ: 1 pack -
Application: Suitable for 8-425, 9mm, 10-425, 11mm snap vials
Material: Glass for Insert, Polymer for feet
Dimensions: 5x29mm,5x31mm/5.7x29mm,5.7x31mm
Capacity: 150-250uL
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack