2ml hplc vials with screw caps for liquid autosampler Waters
Vials - Fisher Sci
Vials Thermo Scientific™ Nunc™ Biobanking and Cell Culture Cryogenic Tubes Store samples from general cold storage to the vapor phase of liquid nitrogen with Thermo Scientific™ Nunc™ Biobanking and Cell Culture Cryogenic Tubes.
Hplc Vials | EC21
Find quality manufacturers on EC21 for Hplc Vials in Pharmaceutical Intermediates. Your Hplc Vials manufacturers are here.
HPLC and GC Vials, Caps, Septas and Inserts Guide
Note: Most 12x32 mm autosampler vials hold between 1.5mL to 2mL of solutions. The sizes for 12x32mm vials outer dimensions are standard between manufacturers but the length of the neck and screw thread of the 9mm (N9) vial may vary, because 9mm short thread is not industry standardized.
8-425 2ml Screw Vials - Quzhou Lab Technology Co.,Ltd,hplc
These vials are recommended for short term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal. Shell Vials are an economical alternative to screw thread vials for Water’s HPLC autosamplers or any other autosampler that doesn’t use a robotic arm to move the vials.
Hplc Vials With Caps at Thomas Scientific
of vials and caps from different sources Bonded cloures with firmly to the cap connected septa for Waters and other autosamplers with penetration problems, especially in HPLC For all autosamplers/robotic systems transporting vials by a magnet, 702155 / 702156 with a magnetic top on the PP cap
News-9-Aijiren HPLC Vials
2ml amber autosampler vial,12mm Diameter,32mm Height,9-425 screw top.Our vials with caps are widely used in standard HPLC and GC applications.The vials can be used on all common autosamplers due to their technical geometry, preferentially they are found on Aijiren, HTA, Shimadzu, Thermo, Varian, Waters, etc.
Autosampler Vial, 2ml HPLC Vial, 9-425 Amber Vial with Blue
2ml amber autosampler vial,12mm Diameter,32mm Height,9-425 screw top.Our vials with caps are widely used in standard HPLC and GC applications.The vials can be used on all common autosamplers due to their technical geometry, preferentially they are found on Aijiren, HTA, Shimadzu, Thermo, Varian, Waters, etc.
HPLC / Autosampler Vials, Caps & Septas
ND9 Short Screw Thread Vials 12 x 32mm 9mm screw thread vials have a 9-425 GPI thread and the closure is dimensionally equivalent to 11mm crimp cap vials.This means that they can be used in any autosampler that uses 11mm crimp cap vials. 9mm screw caps have an advantage over 11mm crimp caps because 9mm screw caps can easily be applied and
Sample Vials and Accessories - Waters Corporation
Screw caps are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap. Screw caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly. LectraBond™ screw caps are available through Waters. This
VWR Autosampler Vials, Inserts and Closures
Vial choices include: Crimp Top, Snap Top, and Screw top vials with a selection of closures. Refer to the Autosampler Compatibility Table on pages 12-13 to determine which vials, closures and inserts will work on your specific autosampler unit.
Sample Vials : Waters
Waters also offers a selection of glass sample vials and plastic sample vials that fit most manufacturers’ instruments. Two of the most popular uses are as HPLC vials and GC vials. These chromatography vials can be used as sample storage vials by adding a solid caps with liner.
2mL Transparent Screw Chromatographic Bottle Autosampler
Athena Technology - Offering 2mL Transparent Screw Chromatographic Bottle Autosampler Headspace Vials at Rs 350/pack in Mumbai, Maharashtra. Read about company. Get contact details and address | ID: 20327546330
Autosampler Vial, Hplc Vial, PTFE Silicone Septa with Cap
Shaoxing Aijiren Technologies Co.,Ltd is one of the leading China autosampler vial racks manufacturers and suppliers, welcome to wholesale cheap 2ml vial, 20ml vials, 12x32 vial, glass vials, hplc vial, sterile vials, 9mm ptfe septum, 10ml glass vial, 1.5ml wide opening vial, ptfe silicone septa, chromatography vial, vial filling machine, headspace vial rack, headspace vial crimper, autosampler
Vials, screw top, amber glass (vial only), volume 2 mL
Vials, screw top, amber glass (vial only) volume 2 mL, amber glass vial, thread for 8-425, pkg of 100 ea; find Supelco-27083-U MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich.
Filter Vials | Thomson Instrument Company
Thomson Filter Vials (patented) are a single system which replaces HPLC Vials, HPLC Caps, Syringes, & Syringe Filters for the filtration of samples. In 15 seconds, Thomson Filter Vials allow for sample preparation of unfiltered samples to filtered samples in an autosampler-ready vial.
you can contact us in the following ways.
-
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 11mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: HPLC and GC system
Volume: 4ml (standard volume)
Dimensions: 15 x 45mm
Neck Diameter: 13mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Water analysis
Qty/Pack: 25pcs/pack or 100pcs/pack
Dimensions: 16 x 100mm
Neck Diameter: 16mm
Volume: 12ml
Payment: T/T
MOQ: 1 pack -
Dimensions: 27.5 x 57mm/27.5 x 75mm/27.5 x 95mm/27.5mm x 140mm
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Environmental analysis
Neck Diameter: 24mm
Qty/Pack: 100pcs/pack
Volume: 20-60ml
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Dimensions: 16.6 x 60mm/18.5 x 65mm
Application: Environmental analysis
Neck Diameter: 15mm
Qty/Pack: 100pcs/pack
Volume: 8-12ml
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Dimensions: 22.5 x 46mm/22.5 x 75mm
Application: GC system
Neck Diameter: 18mm
Qty/Pack: 100pcs/pack
Volume: 10-20ml
Payment: T/T
MOQ: 1 pack -
Material: Nylon; Hydrophilic PVDF; Hydrophilic PTFE; Hydrophobic PTFE; PES; MCE; Hydrophilic PP; Cellulose Acetate(CA)
Qty/Pack: 100pcs/pack
Application: Filter
Payment: T/T
MOQ: 1 pack -
Application: Suitable for 8-425, 9mm, 10-425, 11mm snap vials
Material: Glass for Insert, Polymer for feet
Dimensions: 5x29mm,5x31mm/5.7x29mm,5.7x31mm
Capacity: 150-250uL
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack