2ml hplc vials supplier for lab use with writing space
Hplc Vials at Thomas Scientific
in GC and HPLC (in contrast to screw neck vials N 9 which can be used alternatively) Supplied in PP boxes with 100 vials each Barcoded vials upon request 11.6 x 32 mm vials can be ordered as single components or - along with a closure of your choice - as a Vial Kit in a drawer-like
Membrane Solutions 2ml Hplc Vials Autosampler Vials Amber
Autosampler Vials, MS Lab Supply Sample Vials 2ml Amber Vial with Write-on Spot and Graduations 11mm Crimp Top Glass Vials with Caps MS sample vials provide cleanest products on the market at present. It can reduce the appearance of impurity peak of measuring results.
Clear Sample Vials | World Lab Supplies
MS® HPLC and GC sample vials offer a number of benefits over the standard straight glass sample vials. The flared end assists the needle into the vial enabling the loading of liquid samples easier. This flared end also allows the vial to be easily inserted and removed from the end of the probe using tweezers without breaking the glass due to the vial’s superior strength. MS® caps and
Pipette tips, LTS®, for Rainin pipettes | VWR
These thin-wall tips are designed for use with RAININ Pipet-Lite, Pipet-Plus and EDP3-Plus pipettes with LTS LiteTouch Tip Ejection System. µl tips are specifically designed for use with RAININ E12- and E8- multi-channel pipettes. The unique design prevents drop formation and eliminates the need for touch-off between dispenses. The tips are available in different packaging
Sample Vials : Waters
Maximize your lab efficiency with fewer failed assays and limited instrument downtime caused by vials out of specification. You can choose from Waters broad range of vials, each one is held to tight dimensional tolerances and the certified products have cleanliness measured by LC and MS.
Analytical Reporter November/December 2018 by New Media B2B
THIS new generation of titrator features a 50% smaller footprint for maximum use of your lab space. The sealed body is precision-engineered to resist spills and dust and a high-contrast display
Amazon Best Sellers: Best Lab Sample Vials
10ml Amber Glass Headspace Vials with Plastic-Aluminum Flip Off Caps and Rubber Stoppers, 100 Pack, 20mm Flat Bottom Lab Vial(Amber) 4.5 out of 5 stars 33 $32.00
What minimum volume of sample should be in a HPLC vial (2ml
I am looking for extra small vials for HPLC. Standard vials with inserts have usually a volume of 150 or 200 microliter and a minimum volume of 10 microliters.
Hplc Vials | EC21
Find quality manufacturers on EC21 for Hplc Vials in Pharmaceutical Intermediates. Your Hplc Vials manufacturers are here.
Boil-Proof Microcentrifuge Tubes, Axygen Scientific | VWR
Boil-proof tubes will not open during boilingMicrocentrifuge tubes are made from an ultra-clear polypropylene resin that allows for easy viewing of contents and fit most common rotors for near-universal usage. Tubes and caps are autoclavable, and sterile tubes are delivered already sterilized by radiation. Caps can either be screw-on or attached to the microcentrifuge tubes for easy popping on
Sample Vials and Accessories - Waters Corporation
Quality vials are essential for reliable analytical results. All Waters Certified Vials are tested by LC or LC/MS to assure quality and cleanliness. The test results confirm the vials, cap and septa have been properly manufactured, handled and packaged, and are free from any potential contaminants which could result in chromatographic ghost peaks.
Chromatography Vial Racks | VWR
Description: Store vials efficiently with National 4 ml screw top vial racks, which are stackable for even more space savings. ,66030-548CS,66030-548EA,66030-546EA,66030-546CS Rack/Filling Station, for Headspace Vials, Acrylic, MicroSolv™
Autosampler Vials, Caps and Closures | Fisher Scientific
Autosampler Vials, Caps and Closures Thermo Scientific™ 20 mm Headspace Glass Vials Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish.
Chromatography Vials, Caps, Septa & Inserts, Tubes, Crimper
1.5mL 8-425 Screw Neck Vial ND8 1.5mL 9mm Short Thread Vial ND9 1.5mL 10-425 Screw Neck Vial ND10 1.5mL 11mm Snap Ring Vial ND11 1.5mL 11mm Crimp Ring Vial ND11 4mL 13-425 Screw Neck Vial ND13 1mL Shell Vial Micro-Inserts Vial Racks Hand Crimper, Decrimper
Genesee Scientific 2016q4brochure by Laura - Issuu
Buy 4 Get 1 FREE! All Products On This Page. Same Cat # Only. A 0.2ml 8-Strip Tubes with Individual Attached Caps (SnapStrip) C 0.2ml 8-Strip PCR Tubes, V-Seal -125 Strips/Unit. Cat # 27-104 27
you can contact us in the following ways.
-
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 11mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: HPLC and GC system
Volume: 4ml (standard volume)
Dimensions: 15 x 45mm
Neck Diameter: 13mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Water analysis
Qty/Pack: 25pcs/pack or 100pcs/pack
Dimensions: 16 x 100mm
Neck Diameter: 16mm
Volume: 12ml
Payment: T/T
MOQ: 1 pack -
Dimensions: 27.5 x 57mm/27.5 x 75mm/27.5 x 95mm/27.5mm x 140mm
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Environmental analysis
Neck Diameter: 24mm
Qty/Pack: 100pcs/pack
Volume: 20-60ml
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Dimensions: 16.6 x 60mm/18.5 x 65mm
Application: Environmental analysis
Neck Diameter: 15mm
Qty/Pack: 100pcs/pack
Volume: 8-12ml
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Dimensions: 22.5 x 46mm/22.5 x 75mm
Application: GC system
Neck Diameter: 18mm
Qty/Pack: 100pcs/pack
Volume: 10-20ml
Payment: T/T
MOQ: 1 pack -
Material: Nylon; Hydrophilic PVDF; Hydrophilic PTFE; Hydrophobic PTFE; PES; MCE; Hydrophilic PP; Cellulose Acetate(CA)
Qty/Pack: 100pcs/pack
Application: Filter
Payment: T/T
MOQ: 1 pack -
Application: Suitable for 8-425, 9mm, 10-425, 11mm snap vials
Material: Glass for Insert, Polymer for feet
Dimensions: 5x29mm,5x31mm/5.7x29mm,5.7x31mm
Capacity: 150-250uL
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack