2ml hplc autosampler vials with closures for HPLC sampling USA
Products in Vials on Thomas Scientific
The dram/sample vials are available in clear or amber Type I borosilicate glass assembled with solid top or open hole black polypropylene screw thread closures. The solid top closures are lined with PTFE/F217 material and the open hole closures have PTFE faced silicone septa assembled in the
9mm 2ml Wide Opening Screw Vials - chinalabware.net
Type of Vial Finish and Closures Autosampler vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling.
MSI Brand Autosampler Vials and Closures
9mm DP Wide Opening Screw Thread Vials and Caps with Septa. 2mL, 12x32mm, 9mm wide opening short screw thread vials have a wide neck opening design for easy filling. Accepts Micro-Inserts with 6 mm diameter; Convenient sample identification: I-D write on patch with graduation available in both clear and amber vials
Autosampler Vials, Closures, and Accessories. Life Science
Mass Spec Vial Kits Certified Autosampler Vials, Closures, and Accessories Smaller Crimp Top Vials and 8mm Crimp Seal Caps 12x32mm Crimp Top Vials & 11mm Crimp Seal Caps 12x32mm Screw Thread Vials, Caps, and Septa 15x45mm Screw-Thread and Crimp-Top Vials, Caps, Septa Shell Vials
Vial Racks from Aijiren - Crawford Scientific
Crawford Scientific Ltd Holm Street Strathaven Lanarkshire ML10 6NB. T: +44(0)1357 522961 F: +44(0)1357 522168. Part of the arch sciences group
Waters 717plus Autosampler
variety of HPLC sampling requirements, from the processing of a large batch of samples with varying concentrations, the pre-treatment of a single sample or a batch of samples, or a specialized calibration routine. The rugged and easy-to-use 717plus Autosampler can be used as a dependable, high-performance autosampler on any HPLC system in any lab.
Autosampler Vials & Closures - Ibis Scientific
Ibis Scientific provides Thermo Scientific ™ & Ibis Brand vials and closures which are the recognized standard for chromatography products worldwide. With a portfolio of over 1500 products to fit every autosampler, our selection of high-quality vials, vial inserts, closures and septa will perform reliably in any applications!
2 mL Screw Top Vials and Caps | Aijiren
Aijiren 2 mL screw top vials are constructed from from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. The associated 9 mm screw caps and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber.
Autosampler Vials & Caps for HPLC & GC | Thermo Fisher
Autosampler vials & caps for HPLC, LC/MS, GC and GC/MS There’s a Thermo Scientific vial & closure for every HPLC, GC, MS instrument, application, and budget. Screw Vials, Caps, Septa, Inserts & Kits
Vials & Well Plates / Labware / Supplies & Accessories
Fit all 2.0 mL, 12 x 32 mm, vial-based autosamplers. Compatible with all 9 mm screw-thread caps. PTFE-free—ideal for PFAS analysis (e.g., EPA 537) and other PFAS-sensitive methods. Note: Polypropylene vials and caps prevent sample contamination from PTFE coated septa.
2ml autosampler vials screw thread for HPLC sampling system
2ml autosampler vials screw thread for HPLC sampling system with bonded septa caps, US $ 0.03 - 0.03 / Piece, Laboratory Bottle, EXCELLENT, HM-0715.Source from Ningbo Excellent New Material Co., Ltd. on Alibaba.com.
Screw Top Vials, Caps and Kits | Thermo Fisher Scientific - US
Screw thread vials & closures for HPLC, GC, MS applications. There’s a Thermo Scientific screw top vial for every HPLC, GC, MS instrument, application, and budget. Our screw top clear and amber glass vials and plastic screw top vials are available in 8mm, 9mm, 10mm, and 13mm screw threads.
100 X Membrane Solutions 2ml HPLC Vials 9-425 Autosampler
Autosampler Vial, 2ml HPLC Vial, Clear Lab Vial, Sample Vial with Writing Area, 9-425 Screw-Thread Vial, Blue Screw Cap with Hole, White PTFE & Red Silicone Septa 100 Pack by Alberts Filter 4.8 out of 5 stars 29
Practical HPLC method development screening
Table 3: Typical mobile phase flow rates for HPLC column of various dimension.. The flow rates above are adjusted using the ratio of the squares of the column diameters based on an optimum flow of the 4.6mm column of 1.0 mL/min. i.e. (32 / 4.62) x 1 = 0.425
Antibodies & Protein Biology - Fisher Scientific
Autosampler Vials, Caps and Closures Vials, vial inserts, septa, and caps/closures with or without septa for use with autosamplers and autosampler vials; includes a variety of sizes, configurations, material compositions, and closure types.
you can contact us in the following ways.
-
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 11mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: HPLC and GC system
Volume: 4ml (standard volume)
Dimensions: 15 x 45mm
Neck Diameter: 13mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Water analysis
Qty/Pack: 25pcs/pack or 100pcs/pack
Dimensions: 16 x 100mm
Neck Diameter: 16mm
Volume: 12ml
Payment: T/T
MOQ: 1 pack -
Dimensions: 27.5 x 57mm/27.5 x 75mm/27.5 x 95mm/27.5mm x 140mm
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Environmental analysis
Neck Diameter: 24mm
Qty/Pack: 100pcs/pack
Volume: 20-60ml
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Dimensions: 16.6 x 60mm/18.5 x 65mm
Application: Environmental analysis
Neck Diameter: 15mm
Qty/Pack: 100pcs/pack
Volume: 8-12ml
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Dimensions: 22.5 x 46mm/22.5 x 75mm
Application: GC system
Neck Diameter: 18mm
Qty/Pack: 100pcs/pack
Volume: 10-20ml
Payment: T/T
MOQ: 1 pack -
Material: Nylon; Hydrophilic PVDF; Hydrophilic PTFE; Hydrophobic PTFE; PES; MCE; Hydrophilic PP; Cellulose Acetate(CA)
Qty/Pack: 100pcs/pack
Application: Filter
Payment: T/T
MOQ: 1 pack -
Application: Suitable for 8-425, 9mm, 10-425, 11mm snap vials
Material: Glass for Insert, Polymer for feet
Dimensions: 5x29mm,5x31mm/5.7x29mm,5.7x31mm
Capacity: 150-250uL
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack