2ml hplc autosampler vials with cap for Aijiren autosampler Waters

Hot Selling Screw Neck 2ml HPLC Vials for Aijiren Autosampler

If you use an autosampler, choose the Screw Neck 2ml HPLC Vials for your specific equipment brand. For example, 11 mm crimp vials and 9 mm screw cap vials work with Aijiren autosamplers, but 10 mm and 8 mm screw caps do not.

2707 Autosampler : Waters

The 2707 Autosampler is a versatile, compact sample management system that makes highly precise and reproducible injections of samples into your LC or LC/MS system. It is ideally suited for laboratories where reduced carryover, maximized repeatability, high accuracy, and application flexibility are of concern.

Sample Vials : Waters

Waters also offers a selection of glass sample vials and plastic sample vials that fit most manufacturers’ instruments. Two of the most popular uses are as HPLC vials and GC vials. These chromatography vials can be used as sample storage vials by adding a solid caps with liner. `

For use with Aijiren®, Waters® 12x32mm Vials, 2mL Vials

Aijiren®/Waters™ 2ml Compatible Products, for use with HPLC/GC Autosampler, Vials, Caps, and Accessories. Find all your storage supplies for your scientific needs.

Aijiren Vials and Closures | Aijiren

Aijiren offers a broad portfolio including microvials and microvolume inserts, as well as polypropylene and deactivated vials for sensitive samples. Aijiren vials are fully compatible and perform seamlessly with a wide range of instruments.

100 X 2ml HPLC Vials 9-425 Autosampler Vials and 9mm Blue ABS

100 X Membrane Solutions 2ml HPLC Vials 9-425 Autosampler Vials with Write-on Spot and Graduations Type Threaded Vial and 9mm Blue ABS Screw Caps & Septa [LOW EXPANSION COEFFICIENT] - 9mm Screw Thread Autosampler Vials are made of clear Type 1, Class A Borosilicate Glass with very low expansion coefficient.

Certified 2ml Amber Vials with Crimp Top for Aijiren Autosampler

Certified 2ml Amber Vials squeeze the septum between the edge of the glass vial and the crimped aluminum cap. This forms an excellent seal to prevent evaporation. The septum remains fixed during piercing with the autosampler needle. Crimp cap vials require crimping tools to perform the sealing process.

Autosampler Vial 2ml with Caps, HPLC Vial, 9-425 Amber Vial

2ml amber autosampler vial,12mm Diameter,32mm Height,9-425 screw top.Our vials with caps are widely used in standard HPLC and GC applications.The vials can be used on all common autosamplers due to their technical geometry, preferentially they are found on Aijiren, HTA, Shimadzu, Thermo, Varian, Waters, etc.

What minimum volume of sample should be in a HPLC vial (2ml

High-Performance Liquid Chromatography. Share . Facebook. Twitter. LinkedIn. first of all it depends which autosampler you are using. ... Wit normal 2mL vials I would recomend between 150 and ...

CONSISTENT QUALITY MAXIMUM PRODUCTIVITY - Aijiren.com

Aijiren vials shipped worldwide every year. 30 % Time savings using our full range of short thread screw top vials and caps. 10 + Instrument brands with which Aijiren vials/caps are compatibility tested Best in glass: All vials are made of type 33-51 coefficient of expansion for top performance . 100 % Aijiren vials inspected under our

Polypropylene Vials | Aijiren

Aijiren polypropylene certified vials for autosampler use are translucent and chemically resistant. They are the vials of choice for pH-sensitive samples, sodium, or heavy metal analyses. Polypropylene vials come in snap, crimp, or screw styles and can contain sample volumes up to 700 µL while leaving minimum residual volumes of less than 3 µL.

Sample Vials and Accessories - Waters Corporation

Quality vials are essential for reliable analytical results. All Waters Certified Vials are tested by LC or LC/MS to assure quality and cleanliness. The test results confirm the vials, cap and septa have been properly manufactured, handled and packaged, and are free from any potential contaminants which could result in chromatographic ghost peaks.

Aijiren Standard Autosampler

Figure 1 Overview of the Autosampler The Aijiren autosampler is designed for use with other modules of the Aijiren Series, Series and Series LC, or with other LC systems if adequate remote co ntrol inputs and outputs are available. The autosamplers are controlled by the Aijiren Instant Pilot (G4208A) or by

Vial Trays and Drawers for HPLC Autosamplers | Aijiren

Aijiren autosampler vial trays and drawers are designed to ensure that your autosampler setup is perfectly equipped to deal with a wide variety of applications and sample volumes. Vial drawers are available with various sample position numbers, depending on the required capacity and volume of the vials used.

Vials | Aijiren

Vials Aijiren certified 2 mL screw top vials are constructed from from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. The associated 9 mm screw caps and closures are available with septa constructed from either PTFE silicone or natural red rubber.