2ml autosampler vials with screw caps for HPLC and GC Waters
Phenomenex Vial Part: Verex™ Cap (pre-assembled), 9mm, Screw
Verex HPLC, GC, and autosampler vials offer the lowest ion content possible to reduce sample loss and contamination. From start to finish, Verex HPLC, GC, and autosampler vial and cap products are manufactured to provide high quality, state-of-the-art solutions for your most challenging, sensitive applications.
China Autosampler Vial Manufacturers, Suppliers, Factory
Zhejiang Aijiren Technologies Co.,Ltd is one of the leading China autosampler vial manufacturers and suppliers, welcome to wholesale cheap glass vials, Aijiren vial, sun sri vial, sterile vials, la pha pack vial, chromatography vial, vial filling machine from us.
Autosampler Vial, 2ml HPLC Vial, 9-425 Amber Vial with Blue
2ml amber autosampler vial,12mm Diameter,32mm Height,9-425 screw top.Our vials with caps are widely used in standard HPLC and GC applications.The vials can be used on all common autosamplers due to their technical geometry, preferentially they are found on Aijiren, HTA, Shimadzu, Thermo, Varian, Waters, etc.
Vials, Plates, and Certified Containers : Waters
Autosampler ready formats for small sample volumes. Sample Vials Wide selection of vials, including HPLC Certified vials (tested by HPLC for cleanliness) and LCMS Certified vials (tested for total ion count and presence of clusters in the high mass range).
Antibodies & Protein Biology - Fisher Scientific
Thermo Scientific™ 9 mm Autosampler Vial Screw Thread Caps Prevent septa push through and over- and under-tightening. With AVCS built into these 9 mm screw caps you will get an optimal, consistent seal every time.
LCGC Certified Clear Glass 12 x 32 mm Screw Neck Vial, with
Waters Certified vials are tested for cleanliness by HPLC and held to tightest dimensional tolerances in the industry. LCGC Certified Clear Glass 12 x 32 mm Screw Neck Vial, with Cap and Preslit PTFE/Silicone Septum, 2 mL Volume, 100/pk - 186000307C : Waters
SureStop Screw Vials & AVCS Caps - Thermo Fisher Scientific - US
SureStop vials are designed as part of the Advance Vial Closure System (AVCS) and remove any subjectivity around achieving the optimal seal compression when closing a vial. Below are 2mL, 12x32mm vials in clear and amber glass with 9mm screw thread vials for use with AVCS caps to provide the ultimate in sample security
Autosampler Vials & Caps for HPLC & GC | Thermo Fisher
Autosampler vials & caps for HPLC, LC/MS, GC and GC/MS 2 mL SureStop Vials with AVCS Caps. Innovative screw cap & vial design; ... Scientific 2mL Routine Vials ...
HPLC/GC Autosampler Vials, Caps & Accessories
You can count on JSi Scientific to provide you with the best in HPLC/GC Autosampler Vials, Caps, & Accessories. Our products are compatible with all major brands including: Aijiren®, Waters®, Shimadzu®, Varian®, Hitachi®, Perkin Elmer® and other major brands.
Autosampler Vials, Caps and Closures | Fisher Scientific
Autosampler Vials, Caps and Closures Thermo Scientific™ 20 mm Headspace Glass Vials Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish.
Sample Vials : Waters
Waters also offers a selection of glass sample vials and plastic sample vials that fit most manufacturers’ instruments. Two of the most popular uses are as HPLC vials and GC vials. These chromatography vials can be used as sample storage vials by adding a solid caps with liner. `
News-High Performance Liquid Chromatography Vials,Gas
Quzhou Lab Technology Co.,Ltd mainly produce:9mm short screw HPLC vials, 2ml GC-MS vials,4ml LC-MS vials,HPLC Vial closure septa,9mm bonded caps vials,0.5 dram UHPLC vials, 8-425 screw autosampler vials, 2ml crimp headspace GC vials, 1/2 dram Snap Ring HPLC vials, 4-60ml storage EPA vials, gas chromatography crimp vials, screw headspace Micro vials, chromatography Analysis vials,20ml
Alberts Filter 2ml Autosampler Vial with Writing Area, 9mm
Alberts Filter 2ml Autosampler Vial with Writing Area, 9mm Wide Opening Clear Glass Screw Thread Vial for HPLC, Blue Screw Cap with Hole, Pre-Slit Blue PTFE & White Silicone Septa-100 Pack by Alberts Filter
hplc vials | Sigma-Aldrich
Standard autosampler vials with cap and septa, 12 x 32 mm, 8-425 thread. 1 Product Result
2mL Standard Opening Vials from Supelco | Sigma-Aldrich
2 mL Standard Opening Vials from Supelco. Our standard 2 mL vial is 12 mm in diameter, 32 mm in height, and has a 4.6 mm opening. The thread size on this vial is 8-425. Choice of clear or amber glass. Precleaned or silanized options available
you can contact us in the following ways.
-
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 11mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: HPLC and GC system
Volume: 4ml (standard volume)
Dimensions: 15 x 45mm
Neck Diameter: 13mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Water analysis
Qty/Pack: 25pcs/pack or 100pcs/pack
Dimensions: 16 x 100mm
Neck Diameter: 16mm
Volume: 12ml
Payment: T/T
MOQ: 1 pack -
Dimensions: 27.5 x 57mm/27.5 x 75mm/27.5 x 95mm/27.5mm x 140mm
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Environmental analysis
Neck Diameter: 24mm
Qty/Pack: 100pcs/pack
Volume: 20-60ml
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Dimensions: 16.6 x 60mm/18.5 x 65mm
Application: Environmental analysis
Neck Diameter: 15mm
Qty/Pack: 100pcs/pack
Volume: 8-12ml
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Dimensions: 22.5 x 46mm/22.5 x 75mm
Application: GC system
Neck Diameter: 18mm
Qty/Pack: 100pcs/pack
Volume: 10-20ml
Payment: T/T
MOQ: 1 pack -
Material: Nylon; Hydrophilic PVDF; Hydrophilic PTFE; Hydrophobic PTFE; PES; MCE; Hydrophilic PP; Cellulose Acetate(CA)
Qty/Pack: 100pcs/pack
Application: Filter
Payment: T/T
MOQ: 1 pack -
Application: Suitable for 8-425, 9mm, 10-425, 11mm snap vials
Material: Glass for Insert, Polymer for feet
Dimensions: 5x29mm,5x31mm/5.7x29mm,5.7x31mm
Capacity: 150-250uL
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack