2ml autosampler vials with closures for HPLC sampling Waters
Autosampler Vials & Caps for HPLC & GC | Thermo Fisher
There’s a Thermo Scientific vial & closure for every HPLC, GC, Scientific 2mL Routine Vials ... of Custody from Sample Preparation to the Autosampler ;
Hamilton® 1800 Series 1805 Model Removable Needle Gastight
Bottles, Containers & Vials Cell Culture Equipment & Supplies Chemicals & Reagents Chromatography Equipment & Instruments Filtration Furniture & Fume Hoods General Lab Supplies Glassware Liquid Handling Microbiology Supplies Molecular Biology pH & Electrochemistry Safety Equipment & Supplies
HPLC / Autosampler Vials
9mm screw thread vials have a 9-425 GPI thread and the closure is dimensionally equivalent to 11mm crimp cap vials.This means that they can be used in any autosampler that uses 11mm crimp cap vials. 9mm screw caps have an advantage over 11mm crimp caps because 9mm screw caps can easily be applied and removed by hand and they can be reused.
100 X Membrane Solutions 2ml HPLC Vials 9-425 Autosampler
Autosampler Vial, 2ml HPLC Vial, Clear Lab Vial, Sample Vial with Writing Area, 9-425 Screw-Thread Vial, Blue Screw Cap with Hole, White PTFE & Red Silicone Septa 100 Pack by Alberts Filter 4.8 out of 5 stars 29
Autosampler Vials, Caps and Closures | Fisher Scientific
Autosampler Vials, Caps and Closures Thermo Scientific™ 20 mm Headspace Glass Vials Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish.
China Autosampler Vials And Closures Manufacturers, Suppliers
2mL Clear Glass 12x32mm Flat Base 9-425 Screw Thread Vial with Label. 100pcs/pk. C0000011. 2mL Amber Glass 12x32mm Flat Base 9-425 Screw Thread Vial with Label. 100pcs/pk. C0000143. Blue 9-425 Open Top Ribbed Screw Cap with 9mm Red PTFE/White Silicone Septa 1mm Thick. 100pcs/pk.
Waters 717 Plus Autosampler | ANDbio
The Waters 717 Plus Autosampler injects samples into an HPLC system and automates sampling by storing up to 96 sampling methods or steps. Each method controls all injection parameters for a sequence of vials and incorporates a highly reliable and extremely precise fluid path design that is versatile enough to use for a variety of methods and applications.
9mm 2ml Wide Opening Screw Vials
Type of Vial Finish and Closures Autosampler vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling.
News-High Performance Liquid Chromatography Vials,Gas
Quzhou Lab Technology Co.,Ltd mainly produce:9mm short screw HPLC vials, 2ml GC-MS vials,4ml LC-MS vials,HPLC Vial closure septa,9mm bonded caps vials,0.5 dram UHPLC vials, 8-425 screw autosampler vials, 2ml crimp headspace GC vials, 1/2 dram Snap Ring HPLC vials, 4-60ml storage EPA vials, gas chromatography crimp vials, screw headspace Micro vials, chromatography Analysis vials,20ml
HPLC / Autosampler Vials, Caps & Septas
13mm vials have a 13-425 GPI thread and can hold up to 4ml of sample. They are used by the Waters 48-position autosampler and many others. All vials are manufacture with USP type 1 glass. ND 13 Screw Neck Vials 15 x 45mm TC-130 A TC-130 B TC-130 D 13mm Screw Septas & Caps 13mm Screw Neck Vials 100 TC-130 C 4ml Amber Glass 15 x 45mm, 1st Hydrol
What minimum volume of sample should be in a HPLC vial (2ml
The minimum required volume in the sample vial is vary instrument to instrument and is completely based on the auto sampler, in particular how long needle will insert into the sample vials.
Autosampler Vials
Antibodies & Protein Biology Antibody Production & Purification; Electrophoresis, Western Blotting and ELISA
MS Certified and Certified Vial Kits | Thermo Fisher
No risk for exctractables, no risk of losing valued sample by taking the wrong vial and closures, which might not be compatible with the sample or solvent. Each lot of certified kits is tested by HPLC/UV and GC/MS against 15 critical parameters.
Waters 717plus Autosampler
IEEE-488 control from Waters Data Systems The Waters 717plus Autosampler is an intelligent sample processing system that meets a wide variety of HPLC sampling requirements, from the processing of a large batch of samples with varying concentrations, the pre-treatment of a single sample or a batch of samples, or a specialized calibration routine.
9mm 2ml Wide Opening Screw Vials - chinalabware.net
Some utilize robotic arms to pick up a sample vial; some use tray rotation while others move the sampling needle to the respective vial coordinates. The dimensions of autosampler vials vary. Most autosamplers are equipped with trays that use 12x32mm vial configurations but some like the Waters Wisp require a 15x45mm configuration.
you can contact us in the following ways.
-
Material: USP Type 1, Class A, 33 Borosilicate Glass
Volume: 2ml (standard volume) 1.5ml(actual volume)
Application: HPLC and GC system
Dimensions: 11.6 x 32mm
Neck Diameter: 11mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: HPLC and GC system
Volume: 4ml (standard volume)
Dimensions: 15 x 45mm
Neck Diameter: 13mm
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Water analysis
Qty/Pack: 25pcs/pack or 100pcs/pack
Dimensions: 16 x 100mm
Neck Diameter: 16mm
Volume: 12ml
Payment: T/T
MOQ: 1 pack -
Dimensions: 27.5 x 57mm/27.5 x 75mm/27.5 x 95mm/27.5mm x 140mm
Material: USP Type 1, Class A, 33 Borosilicate Glass
Application: Environmental analysis
Neck Diameter: 24mm
Qty/Pack: 100pcs/pack
Volume: 20-60ml
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Dimensions: 16.6 x 60mm/18.5 x 65mm
Application: Environmental analysis
Neck Diameter: 15mm
Qty/Pack: 100pcs/pack
Volume: 8-12ml
Payment: T/T
MOQ: 1 pack -
Material: USP Type 1, Class A, 33 Borosilicate Glass
Dimensions: 22.5 x 46mm/22.5 x 75mm
Application: GC system
Neck Diameter: 18mm
Qty/Pack: 100pcs/pack
Volume: 10-20ml
Payment: T/T
MOQ: 1 pack -
Material: Nylon; Hydrophilic PVDF; Hydrophilic PTFE; Hydrophobic PTFE; PES; MCE; Hydrophilic PP; Cellulose Acetate(CA)
Qty/Pack: 100pcs/pack
Application: Filter
Payment: T/T
MOQ: 1 pack -
Application: Suitable for 8-425, 9mm, 10-425, 11mm snap vials
Material: Glass for Insert, Polymer for feet
Dimensions: 5x29mm,5x31mm/5.7x29mm,5.7x31mm
Capacity: 150-250uL
Qty/Pack: 100pcs/pack
Payment: T/T
MOQ: 1 pack